Skip to content

Square Shaped Set of 3 Disc Cutters in Wood Box

Part # 125.1756 Only 1 left Weight -- lb -- g
Current price $155.00

Cut precise square shapes from soft non-ferrous metals with this set of three hardened tool steel disc cutters, presented in a fitted wood storage box. Designed for gold, silver, copper, brass, and nickel silver up to 20 gauge thick, each cutter is individually fitted to its matching hole with extremely close tolerances for clean, accurate cuts. The set includes three square sizes — 10×10mm, 15×15mm, and 27×27mm — covering a practical range for jewelry blanks, decorative elements, and metalsmithing projects. Compatible with a mallet or hydraulic press. Made in India.

Features

  • Set of three square-shaped cutters: 10×10mm, 15×15mm and 27×27mm
  • Constructed from properly hardened tool steel with very sharp cutting edges
  • Each cutter individually fitted to its matching hole with extremely close tolerances
  • Cuts soft non-ferrous metals including gold, silver, copper, brass, and nickel silver
  • Suitable for use with a mallet or hydraulic press
  • Includes fitted wood storage box (note: box features round holes sized for the square cutters)
  • Made in India

Specifications

Part Number 125.1756
Cutter Shape Square
Included Sizes 10×10mm, 15×15mm, 27×27mm
Maximum Material Thickness 20 gauge
Compatible Metals Gold, silver, copper, brass, nickel silver
Material Hardened tool steel
Storage Wood box
Origin India
Quantity Set of 3

What's Included

  • 3 square disc cutters (10×10mm, 15×15mm, 27×27mm)
  • Fitted wood storage box

Notes

How to use a disc cutter:

  1. Place the disc cutter on top of a rubber pad for support.
  2. Apply a cutting lubricant, such as Stay Sharp, to lubricate the cutting edges of the punch.
  3. Use a suitable mallet — never a nail-driving hammer. A brass mallet is recommended.
  4. Always support the opposite side of the cutter with a sheet of the same diameter metal being cut. This keeps the upper and lower parts in alignment and helps minimize material sticking.
  5. Do not exceed the maximum recommended thickness (20 gauge) for these cutters.
  6. Only cut soft non-ferrous metals such as brass, copper, silver, and gold.
  7. Ensure cutting edges are facing down before striking.
  8. To prevent rust, keep cutters lubricated between uses and store in a dry location.
  9. Use with a 95 durometer urethane pad to extend the life of the cutters.
California Prop 65 Warning California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.
Brand
Value Line
Part #
125.1756
Type
Punches & Stamps
Dimensions
8 in x 4.5 in x 2.5 in
Cutter Shape
Square
Included Sizes
10×10mm, 15×15mm, 27×27mm
Maximum Material Thickness
20 gauge
Compatible Metals
Gold, silver, copper, brass, nickel silver
Material
Hardened tool steel
Storage
Wood box
Quantity
Set of 3