Cut precise square shapes from soft non-ferrous metals with this set of 7 square disc cutters, stored in a fitted wood box. Designed for use with gold, silver, copper, brass, and nickel silver up to 20 gauge thick, each cutter is individually fitted to its matching hole with extremely close tolerances. Made from properly hardened tool steel, these cutters feature very sharp cutting edges and are compatible with a mallet or hydraulic press. Note that the wood box features round storage holes sized to hold the square cutters securely.
Features
- Set of 7 square-shaped disc cutters in sizes from 4 mm to 16 mm
- Manufactured from properly hardened tool steel for durability and precision
- Each cutter is individually fitted to its matching hole with extremely close tolerances
- Very sharp cutting edges for clean, accurate cuts
- Compatible with use by mallet or in a hydraulic press
- Suitable for soft non-ferrous metals up to 20 gauge thick, including gold, silver, copper, brass, and nickel silver
- Includes fitted wood storage box with round holes sized for the square cutters
- Made in India
Specifications
| Included Sizes |
4 mm (5/32"), 6 mm (1/4"), 8 mm (5/16"), 10 mm (3/8"), 12 mm (1/2"), 14 mm (9/16"), 16 mm (5/8") |
| Number of Cutters |
7 |
| Cutter Shape |
Square |
| Material |
Hardened tool steel |
| Maximum Metal Thickness |
20 gauge |
| Compatible Metals |
Gold, silver, copper, brass, nickel silver |
| Storage |
Wood box |
| Origin |
India |
What's Included
- 7 square disc cutters (4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm)
- Wood storage box
Notes
How to use a disc cutter:
- Use a disc cutter on top of a rubber pad for support.
- Apply a cutting lubricant, such as Stay Sharp, to the cutting edges of the punch.
- Use a suitable mallet—never a nail-driving hammer. Brass mallets are recommended.
- Always support the opposite side of the cutter with a sheet of the same diameter metal being cut to keep upper and lower parts in alignment and minimize material sticking.
- Do not exceed the maximum thickness recommended for your disc cutter.
- Only cut soft non-ferrous metals such as brass, copper, silver, and gold.
- Ensure cutting edges are facing down before use.
- To prevent rust, keep the disc cutter lubricated between uses and store in a dry location.
- Use with a 95 durometer urethane pad to extend the life of the cutters.
California Prop 65 Warning: