Fretz TFS Tube Flaring Set

The Fretz TFS Tube Flaring Set is a purpose-built tool system for creating flared bead spacers from seamless tubing. Designed for precision metalwork, this set allows jewelers and metalsmiths to consistently flare annealed tubing across a range of inside diameters from 3.5mm to 7mm.

The system works by placing an annealed, cut piece of seamless tubing between the two halves of a split mandrel sized to match the tubing's inside diameter. The loaded mandrel is then seated upright in the flaring base, and the tubing is flared by striking it with a stamping hammer. The base keeps the mandrel stable and properly oriented throughout the process, ensuring accurate, repeatable results. For added visual interest, flared spacers can be further textured with hammers to create a variety of surface finishes. Many variations are achievable by adjusting the length, width, and gauge of the tubing used.

For best results, always select the largest split mandrel that fits the chosen tubing diameter.

Features

• Creates flared bead spacers from seamless tubing
• Three split mandrels cover inside diameters from 3.5mm to 7mm
• Flaring base holds mandrel upright for accurate, consistent flaring
• Compatible with annealed seamless tubing
• Tubing can be additionally textured with hammers for decorative variation
• Wood tool holder included for organized storage

Specifications

What's Included

• TFM-1 Split Tube Flaring Mandrel – For tubing from 3.5mm to 4.4mm ID
• TFM-2 Split Tube Flaring Mandrel – For tubing from 4.5mm to 5.9mm ID
• TFM-3 Split Tube Flaring Mandrel – For tubing from 6mm to 7mm ID
• TFB-1 Tube Flaring Base – Holds mandrels upright during flaring
• Wood Tool Holder – For storing and organizing the set

Notes

• Always use the largest split mandrel possible for the chosen tubing diameter.
• Tubing must be annealed before flaring.
• Intended for use with seamless tubing only.
• A stamping hammer (not included) is required for the flaring process.