Silver Economy Flat Rolling Mill with Reduction Gear

Thin, texture, and reduce non-ferrous sheet and stock at the bench with a hand-cranked mill that gears the effort down. The Silver Economy 76mm (3") Flat Rolling Mill with Reduction Gear is Otto Frei's best-selling economy mill for studio and classroom use, built by Value Line and made in India. Designed for light-duty work on soft, non-ferrous metals, it features a protected 4:1 reduction gear train, high-carbon steel flat rolls, and simple T-bar adjustment, with no flywheel required. Whether you are thinning sheet metal or texturing stock, this mill delivers dependable performance.

Features

• Roll Size: 76 mm (3") wide x 43 mm diameter high-carbon steel flat rolls
• Gear Reduction: 4:1 ratio, so four handle turns rotate the rolls once for easier cranking
• Adjustment: T-bar roller adjustment for quick, straightforward gap setting
• Protected Gears: Covered reduction and side gears guard against contamination and wear
• Max Sheet Thickness: 2.0 mm, so anneal often and take small passes for best results
• Non-Ferrous Use: Optimized for silver, gold, copper, and brass
• Warranty: 12-month warranty (non-motorized use only)

Compatibility

Optimized for soft, non-ferrous metals: silver, gold, copper, and brass. Do not roll steel or other ferrous metals. Maximum sheet thickness through the rolls is 2.0 mm.

Notes

What you get:

• Rolling mill main assembly with two flat rolls installed
• Large handle with small handgrip
• T-top roller adjuster and mill wheel
• Printed owner's manual
• Non-ferrous metals only. Do not roll steel or other ferrous metals.
• Do not motorize or modify the unit; modifications void the warranty.
• Before first use, wipe protective grease from the rolls and frame; do not remove grease from internal gears.
• Before each session, wipe rolls clean. After each session, coat rolls with light oil or grease to prevent rust.
• Periodically grease the side gears and reduction gear. Check all hardware for tightness before and after use.
• Make many small reductions and anneal frequently for best results and to protect the mill.
• Ships well-packed in a 12" x 12" x 16" carton at a 52 lb dimensional weight. Minimal setup: wipe rolls, bolt on handle, install T-top adjuster, and align top gears. Detailed instructions are included in the manual.