Sterling Silver Sheet 16GA to 21GA-6" x 1" to 6" x 12" 

Sterling silver sheet stock available in gauges from 16 ga (1.30 mm) through 21 ga (0.71 mm), cut to size in 6" wide pieces with lengths from 1" to 12" in full-inch increments. Select your preferred gauge and length — prices are per piece.

Every sheet is supplied in 1/2 hard temper (Vickers Hardness 90–100) with a brushed finish. The .925 sterling silver alloy provides reliable workability for fabrication, forming, and metalsmithing applications. Dead soft temper can be achieved by annealing; note that it is difficult to re-harden annealed sheet back to 1/2 hard.

Features

• Sterling silver alloy: .925 silver / .075 copper
• Supplied in 1/2 hard temper with a brushed finish
• Vickers Hardness 90–100 (1/2 hard); annealed/dead soft is approximately 66–76 Vickers
• Available in five gauges: 16, 18, 19, 20, and 21
• Cut to order in 6" wide pieces; lengths from 1" to 12" in 1" increments
• Master sheet size: 6" x 12"

Specifications

Gauge Reference – Thickness & Approximate Weight per 6" x 1"

Available Options

Notes

• Weights listed are approximate and based on a 6" x 1" piece; multiply by length in inches for larger cuts.
• Annealed (dead soft) sterling silver is approximately 66–76 Vickers Hardness; it is difficult to re-harden to 1/2 hard once annealed.
• For thinner gauges, see the 22–30 gauge sterling silver sheet listing.

California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.