German Blowpipe Torch For Air/Propane With Hose & Mouthpiece

Reach for this blowpipe when a bench job needs a soft, precisely aimed flame rather than the bite of an oxygen mix. Commonly used in Europe for fine and finest bench work, this German-made torch mixes propane with air supplied either from the operator's mouth or from a foot bellows, producing a flame that is less oxidizing than oxygen/gas torches and a preferred tool among goldsmiths for fine, delicate soldering jobs.

Important: This blowpipe operates at an extremely low propane output pressure. The recommended output pressure is 0.72 psi (500 mm W.S. / 0.05 bar), less than 1 psi. Do not use with pure oxygen.

Features

• Produces a soft, controllable, less oxidizing flame ideal for fine and delicate soldering
• Air supply from the operator's mouth or a foot bellows, mixed with propane
• Includes a 20" mouthpiece hose with attached mouthpiece
• Includes a 40" fuel hose
• Flexible rubber hose with 6 mm ID and 1.5 mm wall thickness
• Made in Germany

Compatibility

• Fuel hose connects to a propane regulator through a nipple connector, which is not included
• Secure the connection with a hose clamp, which is not included
• Replacement hose is part #114.912

Notes

• Not for use with pure oxygen.
• Hose is rated for extremely low pressures only. Inspect frequently for signs of wear and replace as needed.
• Always turn off fuel pressure at the regulator source when the torch is not in use.
• This torch is carried on behalf of several jewelry schools. For installation and usage instructions, contact your jewelry school instructor.