Knew Concepts Mk.V Saw Frames with Lever Tension 3" & 5"

The Knew Concepts Mk.V Jeweler's Saw Frame with Cam-Lever Tension is a refined evolution of the classic jeweler's saw, engineered for rapid, repeatable blade changes without sacrificing precision. Designed for piercing work and other applications requiring frequent blade swaps, the lever system lets you set your preferred blade tension once with the fine-tune knob, then simply flip the lever forward to release and back to return to that exact tension every time — no re-tuning required unless blade size or length changes.

The Mk.V introduces a strengthened triangulated truss design — the same geometry that defines the Mk.IV frames — along with a new, improved blade clamp system. The clamps now feature witness holes so you can visually confirm the blade is fully seated before tensioning. The extra clamp length provides more contact area for a more secure grip, and the witness holes also allow sawdust to escape, keeping the clamp faces clean and reliable over extended use.

Features

• Cam-lever quick tension — flip the lever forward to release, reposition or swap the blade, and flip back to return to your dialed-in tension instantly.
• Fine tension knob — set the blade "ping" once; the lever handles on/off tensioning for subsequent blade changes.
• Witness holes in blade clamps — see the back of the blade to confirm full seating; holes also allow sawdust to exit for consistent clamping.
• Extended clamp length — increased contact area provides improved blade grip and holding strength.
• Triangulated truss frame design — the same reinforced geometry as the Mk.IV for greater rigidity and reduced flex.
• Accepts standard un-pinned jeweler's saw blades (approx. 5-1/8" length), including spiral blades.
• Reversible clamp knobs accommodate right- or left-handed users.

Specifications

Available Options

What's Included

• Knew Concepts Mk.V cam-lever saw frame in selected throat depth
• Instruction sheet (lever-tension version)

Notes

• This frame uses un-pinned jeweler's saw blades only. Coping saw blades (pinned) are not compatible.
• If the lever resists closing, back off the fine knob slightly before closing — do not force the lever.
• If blade slipping occurs, clean the clamp faces and ensure the blade seats straight against the anvil screw.
• The lever can be flipped to slacken the blade at the end of use, which is gentle on blade life during storage.
• California Proposition 65: This product carries a Lead-Nickel warning.