The JEM 640 Otto Frei Stone Setting Tool Kit is designed for Academy of Art University (AAU) students and anyone learning to set stones by hand. This comprehensive kit includes the essential gravers, beading tools, burs, files, and measuring instruments needed to begin successfully setting faceted gemstones. Note: This kit assumes you already own a flex shaft machine and handpiece.
Features
- Curated selection of tools specifically chosen for hand stone setting
- Includes Swiss ball burs in eight sizes ranging from 1.0 mm to 4.5 mm
- Swiss hart burs in three sizes for seat cutting
- Swiss cylinder square cross-cut burs in two sizes
- Glardon-Vallorbe Swiss beading tool kit for finishing bezel and bead settings
- Onglette gravers for clean metal removal and detail work
- Digital calipers for precise stone and seat measurement
- Arkansas sharpening stone for maintaining graver edges
- Selection of needle files and escapement files for refining metalwork
- 3M 1500-grit abrasive paper for surface preparation
- Swiss twist drills on 3/32" shanks for pilot holes
Specifications
| Kit Number |
JEM 640 |
| Intended Use |
Hand stone setting — faceted gemstones |
| Bur Shank Size |
3/32" |
| Drill Shank Size |
3/32" |
| Caliper Capacity |
4" (100 mm) |
| Abrasive Paper Grit |
1500 |
| Kit Revision Date |
July 17, 2018 |
What's Included
- Arkansas Stone, 4 x 2 in., in wood box (110.551)
- Electronic Digital Caliper 4" / 100 mm (135.187)
- Glardon-Vallorbe Swiss Beading Tool Kit (153.249)
- Glardon-Vallorbe LO0403-2-WS Onglette Graver #3 (136.119)
- Wood Handles (137.764)
- Round Graver Handles — qty 3 (137.874)
- 3M Abrasive Paper 1500 Grit — pack of 5 (111.247)
- Divider, German Made, 3 inch (135.075A)
- Glardon-Vallorbe Pillar 6-1/4" Cut 4 Needle File (LA2401-160-4)
- Glardon-Vallorbe Square 65 mm Cut 4 Escapement File (LE3020-65-4)
- Glardon-Vallorbe Square 6-1/4" Cut 4 Fine Needle File (LE2408-160-4)
- Swiss Twist Drills on 3/32" Shanks, 0.90 mm — qty 6 (128.588)
- Swiss Ball Bur 1.0 mm — qty 3 (118.182)
- Swiss Ball Bur 1.3 mm — qty 3 (118.185)
- Swiss Ball Bur 1.6 mm — qty 3 (118.190)
- Swiss Ball Bur 1.9 mm — qty 3 (118.193)
- Swiss Ball Bur 2.4 mm — qty 3 (118.197)
- Swiss Ball Bur 2.9 mm — qty 3 (118.201)
- Swiss Ball Bur 3.5 mm — qty 3 (118.204)
- Swiss Ball Bur 4.5 mm — qty 3 (118.208)
- Swiss Cylinder Square X-Cut Bur 1.2 mm — qty 3 (118.432)
- Swiss Cylinder Square X-Cut Bur 1.4 mm — qty 3 (118.433)
- Swiss Hart Bur 1.5 mm — qty 3 (118.504)
- Swiss Hart Bur 2.5 mm — qty 3 (118.509)
- Swiss Hart Bur 3.5 mm — qty 3 (118.514)
Notes
- A flex shaft machine and handpiece are required but not included in this kit.
- Kit contents revised July 17, 2018 — verify current contents at time of purchase.
