AGILO 5131.XF CABSHINE-XF Square Edge Diamond Polishing Wheel

The AGILO CABSHINE-XF (5131.XF) is an extra-fine grit, square-edge diamond polishing wheel designed to deliver a final shine on cabochons and fine gemstones — particularly on flat facets and edges where a crisp, sharp profile is essential. Mounted on a 3/32" shank and recommended for use at 3,000–7,000 RPM, this wheel is the finishing step in a progressive diamond polishing sequence for bench jewelers performing in-house stone touch-ups.

Features

• Extra-fine diamond abrasive formulated for final polish and touch-up work
• Square-edge profile supports flat facets and crisp edge transitions
• Use with light, crosswise strokes — work with the side of the wheel for best results
• Recommended speed range: 3,000–7,000 RPM
• Mounted on a 3/32" (2.35 mm) shank for compatibility with standard flex-shaft and rotary handpieces

Specifications

How to Use

1. Work crosswise: polish with the side of the wheel left to right, then top to bottom.
2. Apply light pressure — let the diamond abrasive do the work.
3. Practice on inexpensive or scrap stones before working on valuable pieces.

3-Step Square-Edge Polishing Sequence

This wheel is the final step in the AGILO CABSHINE square-edge progression:

1. Step 1 — CABSHINE-M (Medium) Square Edge — Part # 110.111M
2. Step 2 — CABSHINE-F (Fine) Square Edge — Part # 110.121F
3. Step 3 — CABSHINE-XF (Extra-Fine) Square Edge — Part # 110.104 (this item)

Notes

• Effective on many stones up to approximately 9 Mohs hardness; always test on scrap material first.
• Not intended for removing deep scratches — complete Medium and Fine steps before using this Extra-Fine wheel.
• Always wear eye protection and a dust mask when grinding or polishing stones or metal.