Skip to content
Contact Us Jewelry School Partners Frequently Asked Questions Submit Tax Exemption Quick Order
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear - Otto Frei
Durston

Durston 1017 Agile Elite C110mm Combo Rolling Mill with Reduction Gear

Part # 128.1017 Only 1 left Weight <0.1 lb / <5 g
$1,346.00

Availability Sold out

Add to wishlist to get notified when back in stock. We'll email you when it's back in stock. That didn't save. Try again. Ask us when it's due back: [email protected]

Description

A combination rolling mill reduces flat sheet and rolls square wire at one bench station, so a single machine covers both jobs. The Durston 1017 Agile Elite C110mm pairs a robust copper finished frame with a 75 mm flat rolling area, nine square wire grooves, and a 4:1 reduction gearbox to support demanding metal forming work.

The revolving handle turns smoothly as metal feeds through the rolls, while the rear catch tray and groove pointer bar keep each pass visible and aligned.

Features

  • Combination rolling mill configuration for both sheet and wire work in one compact unit.
  • Expanded flat rolling area designed to give more space for pattern plate and flat sheet rolling.
  • Integrated square wire rolling grooves on the main roll for forming a range of wire sizes.
  • Adjustable T-bar on the top of the mill for quick, controlled roll gap adjustments.
  • Ergonomic revolving handle designed to reduce effort and fatigue during longer rolling sessions.
  • Rear catch tray finished in white to improve visibility and make it easier to retrieve rolled pieces.
  • Groove pointer bar to help align metal accurately with the wire grooves.
  • 4:1 reduction gearbox that multiplies leverage for smoother, more controlled rolling.

Notes

What you get:

  • Agile Elite C110mm Combo Rolling Mill: combination rolling mill with 4:1 reduction gearbox and revolving handle
  • Extension Roll #1: D-shape extension roll with 6 mm, 5 mm, 4 mm, 3 mm, and 2 mm profiles
  • Extension Roll #2: D-shape extension roll with 8 mm, 6 mm, and 3 mm profiles
  • Extension Roll #3: D-shape extension roll with 10 mm and 7 mm profiles
  • Comfort-Fit Extension Rolls (Pair): top and bottom comfort-fit extension rolls covering approximately 3–7 mm
  • Pattern Plate: steel pattern plate for imprinting designs during flat rolling
  • Rolling Mill Cover: protective cover to help shield the mill from dust and dirt when not in use

The expanded flat area and included pattern plate are intended for use together, giving you more room to support longer or wider patterned pieces during rolling. Use the adjustable T-bar and groove pointer bar to fine-tune pressure and alignment for consistent results when switching between sheet, wire, and extension rolls.

Specifications

Brand
Durston
Part #
128.1017
Type
Rolling Mills
Dimensions
17 in x 12 in x 19 in
Roller Type
Combination
Flat Rolling Area Width
75 mm (approx. 2.95")
Maximum Sheet Rolling
Up to 5.5 mm (approx. 0.22")
Maximum Sheet Thickness
6 mm (approx. 0.24")
Square Wire Groove Range
1–5 mm (approx. 0.04–0.20"), 9 grooves
Gearbox
4:1 reduction
Range
Agile
Finish
Powder-coated copper
Weight
70 lb (approx. 31.8 kg)

Documents

Specs, manuals, and certificates for this product. All files open in a new tab.

Durston Rolling Mill Instructions Manual · 1041 KB · 8 pages
California Prop 65 Warning California Prop 65 Warning:
Cancer and Reproductive Harm. www.P65warnings.ca.gov.

Reviews · 1

This product has 1 review.

Read & write reviews ↓
  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
B
Bill C.
Stellar Little Mill

As I usually do with any new equipment, I went over the machine, greasing all fasteners, inspecting threading, checking alignment and functionality, etc. This machine is well-made and meets the high reviews it typically gets. Fit and finish is *superb* (note comment below on shipping, however). Alignment of the rolls is spot on. The rolls arrived heavily greased, as expected, and in perfect condition. The extra outboard rolls were also greased, wrapped in vapor phase inhibitor paper, and encased in bubble wrap. The circlip tool is also good quality and the extra clips are appreciated. The included pattern plate (flowers) is a useful one to me, also greased and double-bagged. Hex wrenches are provided to fit all fasteners.

The cover is much better than expected, being made of a heavy-duty, waxed canvas. It has a front pocket to hold the tools and any miscellaneous items. The added microfiber towel and gloves are a nice touch (no pun intended).

Two surprises (to me). The catch plate, new on the Agile Elites, is metal, and I had expected plastic, and it is very firmly attached. Durston did it right. The other surprise, as I never read anything mentioning it, is that the handle arm is aluminum, not cast or ductile iron. Generally, I’d prefer a stronger material for a high stress part like this. The shaft connection, however is large, as is the keyway, which should offset any wear concerns. The plastic finger-grooved handle is comfortable enough, though I may substitute it for an ungrooved wood handle.

The only issue I had was some shipping damage (UPS). The machine appears to have shifted in the box, and the ends of the feet on one side went through the side of the box and had their paint scraped off. No other damage, and no parts loss. Otto Frei addressed it immediately. Great customer service!

I debated for the better part of a month between the Agile Elite C110 and the Agile Elite C140 … as well as some Pepetools mills. The C110 won out in the end. Despite the larger diameter rollers and 5-1 gear ratio of the C140, when I considered what I actually need vs the larger machine’s capability, the answer was clear. First, the difference between the flat areas of the two mills only differs by about 1/2 inch, plus the flats on the C110 are still large enough to accommodate most pattern plates, unlike the smaller “regular" Agile series combo mills. Wire rolling does not require the same level of mechanical advantage as patterning, so the Agile Elite C110 and C140 are essentially identical in that respect. There is also an approach angle advantage to the smaller rollers of the C110, which makes it marginally easier to start a patterning roll.

All in all, I can see the considerable thought that went into the design and market positioning of the Agile Elite mills. Very high capability, meaningful improvements over the previous Agile mills, and extremely competitively priced. Only one minor nod to saving costs in the handle, perhaps, but the redesigned rolls and t-handle, the stellar addition of the most useful outboard rollers (with extras, no less!), plus the other extras vastly make up for that!

Very highly recommended, as is Otto Frei!