Complete jeweler’s flex shaft kit with reversible M.SR motor, cast metal foot control, quick-change handpiece, accessory assortment, and clamp-on hanger for a ready-to-run bench setup. The motor hums overhead while the handpiece stays light and precise in your hand.
Features
- All-in-one flex shaft system configured for jewelry bench work and general metalsmithing
- Reversible M.SR motor supports both right- and left-handed use and specialized grinding and polishing techniques
- C.SCT cast metal foot control provides smooth, precise speed adjustment with a wide, stable profile
- H.20 lever-style quick-change handpiece allows fast bur changes for 3/32" shank tools without a chuck key
- AK11 43-piece accessory kit includes abrasives, burs, brushes, and polishing wheels for shaping, refining, and finishing
- MAMH-1 clamp-on hanger positions one or two motors overhead and includes an integrated handpiece rest
- Standard flexible shaft and sheath connect to Foredom and many other quick-disconnect handpieces
- Supplied as a coordinated system so you can go from rough work to final polish with one setup
Specifications
| Property |
Value |
| Motor Model |
M.SR flex shaft motor |
| Motor Power |
1/6 HP |
| Motor Speed |
Up to 18,000 RPM |
| Motor Features |
Ball bearing construction, reversible rotation |
| Speed Control |
C.SCT-1 cast metal housing foot control with non-skid base |
| Kit Voltage |
115 V (C.SCT-1 model, CSA Listed) |
| Handpiece |
H.20 lever-style quick-change handpiece, 3/32" shank capacity |
| Accessory Kit |
AK11 43-piece abrasive, burs, brush, and polishing assortment (25,000 RPM max) |
| Motor Hanger |
MAMH-1 clamp-on hanger with MAHR-2 handpiece rest and two UA10658 spring safety clips |
| Bench Clamp Capacity |
Up to 2-1/4" (57 mm) bench thickness |
| Brand |
Foredom |
What's Included
| Part # |
Item |
Description |
| M.SR |
Flex Shaft Motor |
1/6 HP reversible Foredom M.SR flex shaft motor, up to 18,000 RPM (use only with a speed control, not plugged directly into a wall outlet) |
| C.SCT-1 |
Metal Housing Speed Control |
Cast iron foot-operated speed control with wide profile and non-skid pads for stable, smooth speed adjustment |
| H.20 |
Quick-Change Handpiece |
Lever-style quick-change handpiece for 3/32" diameter tools, based on Italian and Swiss-style quick-change designs |
| AK11 |
43-Piece Accessory Kit |
Assortment including 3M Scotch-Brite EXL wheels, 3M Ceramic Purple sanding drums, 3M radial bristle discs, V Stone abrasives, CW and Metal Master polishing wheels, steel cutters and burs, wire and bristle brushes, felt wheel, platinum white compound, and A-10081 rotating bur/tool holder (7" (178 mm) diameter x 4" (102 mm) high, center cup 2-3/4" (70 mm) diameter x 3" (76 mm) deep). Foredom may substitute similar products when necessary. |
| MAMH-1 |
Clamp-On Motor Hanger |
Three-piece hexagonal support rod with top safety hook, clamp mount for benches up to 2-1/4" (57 mm) thick, MAHR-2 handpiece rest, and two UA10658 spring safety clips |
Compatibility
- M.SR motor includes standard flexible shaft and sheath for use with Foredom and many other brands of quick-disconnect handpieces
- C.SCT-1 foot control is designed for use with most Foredom flex shaft motors
- H.20 quick-change handpiece is intended for use with 3/32" (2.38 mm) shank burs and tools only
Notes
- Do not plug the M.SR motor directly into a wall outlet—always operate it through the supplied speed control.
- Use the reverse function with caution when working with screw-top mandrels; reverse rotation can loosen unmounted wheels on threaded mandrels.
- Alternate forward and reverse directions to extend the life of some abrasives and to aid with symmetrical grinding, carving, and polishing.
- Secure the MAMH-1 hanger clamp firmly to the bench and route the shaft so it hangs freely without sharp bends.
- When assembling the hanger, tighten couplings and set screws as instructed so the support is rigid in use.
