Ir a contenido

Meco Midget Torch Primo Juego de mangueras flexibles resistentes al fuego - 8'

Part # 114.189 Only 3 left Weight <0.1 lb / <5 g
Current price $88.00

Description

Las mangueras del soplete van desde los reguladores hasta el soplete, y este juego Primo reemplaza la manguera rígida y pesada que suele instalarse por una considerablemente más flexible y notablemente más ligera, por lo que el trabajo prolongado en el banco de joyero implica menos arrastre y volumen.

Fabricado para el Meco Midget Torch, el juego mide 8 pies (96 pulgadas) de largo y está codificado por colores para una identificación rápida, con rojo para el gas y verde para el oxígeno. Cada manguera tiene un diámetro interior de 3/16" y ha sido probada para comprobar su resistencia al fuego.

Características

  • Considerablemente más flexibles y ligeras que los juegos de mangueras de soplete estándar
  • Codificadas por colores: rojo para el gas, verde para el oxígeno
  • Probadas para comprobar su resistencia al fuego
  • Longitud de 8 pies (96 pulgadas)
  • Diámetro interior de 3/16"
  • Reducen la fatiga durante el uso prolongado del soplete

Compatibilidad

  • Diseñadas para el soplete Meco Midget
  • Compatibles con cualquier soplete que utilice conexiones norteamericanas Tipo A (3/8") en el extremo del soplete y conexiones norteamericanas Tipo B (9/16") en el lado del calibre o del tanque

Specifications

Brand
Meco Midget Torch
Part #
114.189
Type
Sopletes
Dimensions
5.5 in x 5 in x 1.5 in
Hose Length
8 feet (96 inches)
Inner Diameter
3/16"
Torch-End Fitting
North American Type A, 3/8"
Gauge/Tank-End Fitting
North American Type B, 9/16"
Color Coding
Red (gas), Green (oxygen)
Fire Resistance
Tested fire resistant
California Prop 65 Warning California Prop 65 Warning:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. www.P65warnings.ca.gov.

Reviews · 3

This product has 3 reviews.

Read & write reviews ↓
  • 5 stars: 2 (67%)
  • 4 stars: 1 (33%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Anonymous
Super

Super good

D
David Peterson, Skidmore College Department
Good, not great.

First, the inside diameter is 1/8", not 3/16" as advertised. I would have returned the hose, but I think I can make it work in the end. Second, these hoses are rather expensive, but since everyone sells them for roughly the same amount I assume this reflects the cost of manufacturing. On the positive side, they are very flexible and light weight, so if you are struggling with a heavier welding hose on a small torch, these are a big game changer.

C
Carla M Fox
Great hoses

I needed to replace my hoses for my Meco Midget torch. I needed less than 12' of hoses, so tried these. When they came they were so small I was sure they wouldn't work. But they do, just like my old hoses. And these are light weight. I wish the description between the 2 different hose types on Otto Frei explained their differences better.