The EuroTool Value Line Bench Lathe with 2 Hoods is a 110V benchtop polishing unit designed for jewelers and metalsmiths who want a capable, affordable polishing system. Powered by a 1/6 HP variable speed motor with a range of 1800–7500 RPM, this lathe delivers consistent performance for buffing and finishing applications. The kit ships complete with tapered spindles, two 4-inch medium-grit abrasive satin finish wheels, one pair of replacement motor brushes, mounting hardware, a hex key, and an owner's manual — everything needed to start polishing right out of the box.
The two included polishing hoods feature 2-1/2" outlets that can be connected via an appropriate hose to a vacuum or dust collection system, such as a shop vac or a Quattro dust collection unit, helping keep the work area clean during polishing. Speed is controlled by a single knob that also powers the unit on and off, keeping operation simple and intuitive.
The unit mounts on four rubber feet and includes two wood screws for securing the base to a work surface — a recommended practice for best results. Two mounting holes are located at the front of the unit for this purpose. Suitable for use with buffs up to 4 inches in diameter.
| Voltage | 110V |
|---|---|
| Motor | 1/6 HP variable speed |
| Speed Range | 1800–7500 RPM |
| Spindle Shaft Diameter | 1/4" |
| Max Buff Diameter | 4" |
| Base Dimensions | 6-1/4" wide x 5" deep |
| Spindle Height | 4" (center of spindle to table) |
| Overall Width (with spindles) | 13-1/4" |
| Hood Outlet Diameter | 2-1/2" |
| Warranty | One year |
| Origin | China |
For best results, secure the unit to a work surface using the two front mounting holes and the included wood screws. The 2-1/2" hood outlets are compatible with standard vacuum hose connections such as a shop vac or Quattro dust collection unit (sold separately). This lathe is available in 110V only.
California Prop 65 Warning:No reviews yet. Be the first to share your experience with this product.
Write a review ↓