Support de microscope Acrobat GRS 003-630 avec repose-tête

The GRS Acrobat Microscope Stand with Headrest delivers outstanding flexibility for professional jewelers, engravers, and metalsmiths who rely on microscope-assisted work. Designed by Glendo/GRS, this stand works with you rather than against you — arms move with adjustable friction and can be locked firmly in position, while the entire unit swings away cleanly when not in use. The built-in headrest reduces neck and back strain during extended sessions at the bench.

The heavy steel base measures 6" × 4" and weighs 19 lbs, providing a stable foundation. Four mounting holes accept the included wood screws for permanent bench attachment, or the base can be secured with C-clamps (not included) if you prefer not to drill into your work surface. The 24" steel rod mounted to the base allows the arm to be set anywhere from a low of 7¾" to a maximum height of 25", measured from the center of the mounting ring. When fully compressed, the arm including the microscope mounting ring extends 16¼" deep; in the fully extended position, that depth reaches 33¼".

The mounting ring features an inside diameter of 84mm (3.3"), 21.1mm wide and 7.1mm thick, with three adjustable plastic set screws to secure the scope head. This ring accommodates OttoSetters microscopes, Meiji microscopes, and many other models with a compatible barrel diameter.

Features

• Adjustable friction arms with lockable positioning for precise microscope placement
• Swings away from the work area quickly when not in use
• Built-in headrest helps reduce neck and back strain during long work sessions
• Heavy 6" × 4" steel base with four mounting holes for permanent bench attachment
• 24" vertical steel rod supports arm positioning from 7¾" to 25" height
• Arm depth ranges from 16¼" (compressed) to 33¼" (fully extended)
• 84mm (3.3") inside diameter mounting ring secured by three adjustable plastic set screws
• Four wood screws included for bench mounting; C-clamp use also supported

Specifications

What's Included

• GRS Acrobat Microscope Stand with headrest
• 4 wood screws for bench mounting

Notes

• C-clamps for bench attachment are not included.
• Microscope not included; sold separately.
• Shipping weight exceeds the 19 lb stand weight — factor this in when ordering.
• This product contains materials subject to California Proposition 65 warnings (Nickel, Cobalt, Cadmium).