Knew Concepts Titanium Soldering Strips

Bend and file your own custom soldering clamps at the bench in minutes from a straight strip of fully annealed titanium. Knew Concepts Titanium Soldering Strips are individual 4-inch straight strips, inspired by British Master Goldsmith James Miller, and they bring a professional-grade material advantage to hard soldering operations where steel clamps fall short.

Titanium offers meaningful benefits over traditional steel clamps in the soldering environment. Solder does not stick to titanium, and neither does enamel. The metal stays strong when red hot, does not erode or flake under heat, and most importantly, transfers heat far more slowly than steel. This means titanium clamps interfere less with nearby solder joints, allowing tighter, more precise work with smaller clamp profiles.

Features

• Fully annealed titanium that bends and files easily to create custom clamp shapes
• Solder and enamel do not adhere to titanium surfaces
• Maintains strength at red-hot temperatures without eroding or flaking
• Transfers heat significantly more slowly than steel, reducing interference with adjacent solder joints
• Smaller clamp profiles possible due to titanium's structural integrity under heat
• Sold individually as 4-inch straight strips
• Also referenced as Knew Concepts Titanium Soldering Clamps and Knew Concepts Titanium Soldering Clips

Notes

What you get:

• One (1) titanium soldering strip, 4 inches in length

Suggested uses include:

1. Holding ear wires during soldering
2. Holding bails and jump rings
3. Re-setting sweat-soldered panels that have warped during a first soldering pass
4. Clamping multiple items together during soldering
5. Soldering hemispheres into a full sphere
6. Holding spheres onto ring shanks