Wolf Sand Blaster A-WTSB-P14 Filter Regulator

Clean, dry air at a steady pressure is what makes fine abrasive work predictable. The Wolf A-WTSB-P14 Filter Regulator is a replacement part for the air supply on Wolf micro-abrasive and benchtop sandblasting setups. It performs two jobs before your compressed air reaches the blasting media: it removes moisture and it controls the pressure.

Features

• Removes moisture. It catches water and condensation from your compressor line before they reach the abrasive, so damp air doesn't spoil the media.
• Regulates pressure. You set your working PSI and it stays there, so the abrasive flows evenly from the start of a session to the end.
• Protects your cabinet and nozzle. Fine media in compact cabinets clumps easily when air is wet. Dry air keeps it moving and helps prevent nozzle clogs that interrupt your work.

Why Replace It: Over time a worn or saturated filter regulator lets moisture through, and pressure becomes harder to hold steady. Media starts to clump and spray patterns turn uneven. A new A-WTSB-P14 brings your setup back to clean, consistent airflow, which matters most for detailed jobs like cleaning watch cases, finishing small parts, and texturing jewelry.

Care and Maintenance

• Check the filter bowl often for trapped water or oil from the compressor.
• Drain the bowl before long blasting sessions.
• Set your compressor to deliver clean, regulated air within your machine's rated operating limits.