Glendo GRS

A pre-cut graver saves the bench time normally spent shaping a blank, and these GRS Pre-Cut Quick-Change (QC) High-Speed Steel Flat Gravers arrive ...

A hand graver handle is what you hold while cutting by hand at the bench, and this Glendo GRS Quick Change (QC) handle arrives with 3 standard-leng...

Screw this plate to the benchtop and a BenchMate tool slides onto the dovetail and locks down where you work. The Glendo GRS 004-557 Fixed Dovetail...

A bench pin that drops onto a dovetail mounting plate, so sawing, filing, and setting work is supported right where the BenchMate holds it. The GRS...

An RFF point graver cuts with a rounded top surface, letting the engraver shape relief angles to preference. The Glendo GRS C-Max Carbide RFF Point...

Keep QC tools close, organized, and easy to identify. The GRS QuickPick (044-562) is a dedicated storage tray system designed to fit GRS Quick Chan...

These gravers go from the package straight into the handle with no shaping required: the GRS Pre-Cut Quick-Change (QC) High-Speed Steel (HSS) Ongle...

A heavy duty steel plate that gives the bench a solid, flat surface to mount hardware to and to work directly on. The GRS 004-559 Optional Steel He...

Thermo-Loc holds rings, bracelets, pendants and other irregular or fragile pieces steady at the bench when a clamp or a vise cannot take a safe gri...

These gravers go from the package straight into the handle with no shaping required: the GRS Pre-Cut Quick-Change (QC) High-Speed Steel (HSS) Round...

A tapered round graver cuts with angled sides that taper to a rounded bottom, for hand engraving and stone setting at the bench. Years of developme...

A quick change tool holder is the part that grips the graver and drops into the handle or handpiece, so a shank can be swapped without re-seating t...

A ring holder secures a ring at the bench so both hands stay free for engraving and setting. The GRS 004-735 Inside Diameter (ID) Ring Holder with ...

A parallel flat graver cuts flat-bottomed lines for background removal and detailed engraving work. Glendo GRS C-Max Carbide Parallel Flat Gravers ...

A graver blank is ground to its finished point at the bench, so starting from a diameter close to the tool you want saves cutting away carbide you ...

A V-point graver cuts the V-shaped lines used for bright-cutting, undercutting bezels, and setting stones. For years, engravers and jewelers have s...

The GRS GlenSteel Tapered Flat graver features tapered sides and a flat tool bottom, engineered with outstanding toughness to resist breaking and c...

An onglette graver cuts the fine, narrow lines used in hand engraving and stone setting work. For years, engravers and jewelers have used carbide g...

The GRS GlenSteel Parallel Flat graver combines outstanding toughness with a parallel-sided, flat-bottom geometry designed to resist breaking and c...

GRS C-Max Carbide Tapered Flat Gravers feature a wider flat top, narrower flat bottom, and flat sides that angle inward — a geometry purpose-built ...

The GRS Quick Change (QC) Short Graver Handle is part of the expanding GRS QC tool holding system, designed for engravers and stonesetters who dema...

A quick change tool holder grips a round shank graver and locks into the handpiece, so tools can be swapped without resetting the cut. The Glendo G...

A workholding fixture carries a tool at the height the job needs, so the bench does not dictate the posture. The GRS Slide & Lock Original Tall...

This attachment set is the pin and plate package that lets one vise hold rings, flat work, and irregular shapes at the bench. The GRS 030-520MPV At...

Hold work at bench level for engraving and stonesetting without committing to a full engraving block. The GRS 004-628 Multi-Purpose Vise offers an ...

A double soldering station puts a board and two adjustable third hands on the bench so a piece can be held from both sides while you work. The GRS ...

The GRS 004-659 Pitchcup (Empty) is a small pitch cup designed to fit the GRS BenchMate, GRS engraving blocks, and the GRS Multi-Purpose Vise. Sold...

GRS Pre-Cut Quick-Change (QC) HSS Knife Gravers arrive ready to use straight out of the package — at approximately the same price as a standard gra...

The GRS 003-594 Copper Practice Plates provide engravers with a consistent, ready-to-use surface for developing and refining hand engraving techniq...

This organizer keeps handpieces within easy reach. The included clips that fit the side of some commercial benches. It can also be mounted to a fla...

Develop your engraving and stone setting skills with these brass practice plates from Glendo GRS. Made from consistent, predictable materials, thes...

The GRS 022-140 Scribe Tool from Glendo GRS makes stipple design transfer and marking layouts quick and easy. Fitted with a durable carbide tip, th...

Thermo-Loc is a reusable, U.S.-made work-holding polymer that is rigid at room temperature and becomes pliable when warmed. It's ideal for securing...

A quick change tool holder grips a round shank graver or engraving tool and locks into the handpiece, so a tool can be swapped mid-job without rese...

GRS 002-118 Heat Treated Hard Steel Points give jewelers, engravers, and metalsmiths a versatile blank to quickly fabricate custom tooling. Each po...

The GRS 004-872 is a 1.8mm round hole Quick Change (QC) tool holder, sold individually, designed specifically to hold 1.8mm round shank gravers. Un...